Estimated Arrival: Between Apr 17 and Apr 26. *ETA to UK Only
Shipping: Free Shipping. All The Time.
PolySupport™ is a material designed to solve one of the most intimidating problem in desktop FDM/FFF 3D printing: support. PolySupport™ generates support structures that can be easily removed by hand.
No More Hassle : PolySupport™ works just like your regular 3D printing filaments. Easy to print and store. No sensitivity to normal moisture or heat and no need to work with dangerous organic solvents.
Freedom of Creation Redefined : How many times have you printed a part only to find out that either the print failed due to the lack of support, or how difficult it can be to remove the support without causing some damage to the part? We are glad to provide you with a new solution. PolySupport™ is a material designed specifically to generate support structures that are adequate to support the part being built, and yet extremely easy to remove afterwards.
Single & Dual Extruders: PolySupport™ can be used on both dual and single-extrusion printers. It can be used either as a dedicated support material (dual-extrusion), or as both the modelling and support material (single-extrusion). In both cases the support structure can be easily removed. So no matter what printer you may have you can rely on PolySupport™ to support your creations.
220˚C – 230˚C
20mm/s – 40mm/s
25˚C – 60˚C
Glass with glue, blue tape, BuilTak®
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters
PLA based material from Polymaker’s portfolio + +
PETG based material from Polymaker’s portfolio –
ABS based material from Polymaker’s portfolio –
PC based material from Polymaker’s portfolio +
PVB based material from Polymaker’s portfolio +
TPU based material from Polymaker’s portfolio +
Nylon based material from Polymaker’s portfolio – –
+ + support the model very well
+ generally support the model depending on its geometry
– generally doesn’t support the model depending on its geometry
– – do not support the model
Drying Settings: 80˚C for 8h
Recommended Support Materials: N/A